Make a wireless weather station using DHT22 sensor NRF24LO1 module and DS3231 RTC interfacing with Arduino Nano and DUE (Copy)

KIT INCLUDES:

Arduino Due with Due cable-1
Arduino Nano with nano cable-1
3.2″ TFT display-1
DHT22 sensor -2
NRF24L01 sensor -2
DS3231 RTC sensor -1
Small Breadboard(400 pins)-2
Jumper Wires male to male – 40 piec
Jumper Wires male to female – 40 piece
Powerbank-2 (not included in kit)
Jumper Wire Cable Housing Shell Connector – 2

HARDWARE REQUIRED

Name: Make a wireless weather station using DHT22 sensor NRF24LO1 module and DS3231 RTC interfacing with Arduino Nano and DUE (Copy)
Brand: Robokreeda
SKU: 3602
Price: 2973.6 INR
Availability: InStock
Rating: 5 (1 reviews)

Arduino Due with Due cable-1
Arduino Nano with nano cable-1
3.2″ TFT display-1
DHT22 sensor -2
NRF24L01 sensor -2
DS3231 RTC sensor -1
Small Breadboard(400 pins)-2
Jumper Wires male to male – 40 piece
Jumper Wires male to female – 40 piece
Powerbank-2 (not included in kit)
Jumper Wire Cable Housing Shell Connector – 2

SPECIFICATION

DS3231 RTC MODULE

SOFTWARE REQUIRED

Arduino IDE ((Programmable platform for Arduino boards)

You can download it from this link: https://www.arduino.cc/en/Main/Software)

PIN REQUIRED

DS3231 RTC MODULE

NRF24L01 MODULE

ARDUINO NANO

ARDUINO DUE

3.2 TFT DISPLAY

INSTALL LIBRARY

CIRCUIT CONNECTION

TRANSMITTER CONNECTION

1. Output pin of dht22 to the d4 pin of Arduino Nano.

2. Connect the ground and Vcc of the dht22 and Arduino Nano to the breadboard negative and positive rail.

3. Now connect nrf24lo1 to the circuit (see the image NRF24L01 to Arduino Nano)

RECEIVER CONNECTION

1. In the receiver part we have to use header pins and connect to 7 points on the due board (see picture due connection

2. wires are also connecter to the MOSI,MISO and SCL pin of due board.

3. Now connect the wires to the header pins and fix the 3.2 tft display the the due board.

4. Connect the ground and 3.3V to the breadboard.

5. Next connect the ground and Vcc of dht22 and ds3231 to breadboard negative and positive rail.

6. Connect the i2c pin of due board to the i2c pins of ds3231 (scl 21 to sda and sda 20 to scl)

7. Connect the output of dht22 to 8 pin of due.

8. Now connect the nrf24lo1 to the circuit (see image NRF24L01 to Arduino due)

CODE

TRANSMITTER CONNECTION

https://docs.google.com/document/d/e/2PACX-1vSb2c16m0UbSQmy1QPte3RV399VpqjWEMKjIfZ9Xpa3nnAQ_klSUktRAJpbd2zs-AvoeFoIx1OWK3N4/pub

RECEIVER CONNECTION

https://docs.google.com/document/d/e/2PACX-1vSsuHc_xLNU6ydVmcEIAg3IBYxOQj2k1XPMeUY3-gfG6F5rT0FsOq89xF_HWG6FzQvrZwWrSneCuBdr/pub

NOTE: In receiver code first uncomment (line 54 IN PIC) and upload the then again comment the line and upload it once more (see image comment)

THEN MAKE THIS LINE AS COMMENT

CHANGE THE DATA

OUTPUT

In this Arduino Project we build a Wireless Weather Station using the fast and powerful 32bit Arduino Due board.

We measure the temperature and the humidity with a couple of DHT22 sensors and we communicate with the remote sensor

using the 2.4GHz NRF24L01+ module.

it displays the current date and time, the indoor temperature and humidity, and the outdoor temperature

and humidity. The readings of the outdoor sensor are updated every second in order to demonstrate that we have a reliable

communication link established with the transmitter which is outside at a distance of 5m. The readings of the indoor sensor

are updated once every minute. The heart of the project is the fast Arduino Due, and as you can see there is no flickering

of the screen when the values are updated

Related products

Make A Line Follower Robot Using L293D Motor Driver Module Interfacing With Arduino Uno-

Project Basic R3 Starter Kit compatible

ARDUIN0 kit with RFID and bluetooth compatible with Arduino IDE

Crowbits-Creator Kit Based on Arduino, 12-in-1 STEM Toy for Kids, Educational Science Experiment Set, Coding Block Sensor Module, Crowbits Creator Kit

2Wd Transparent Smart Motor Robot Car Chassis Kit with Arduino Board

Basic Starter Kit for Compatible with Arduino SMD UNO, Breadboard, LED, Resistor,Jumper Wires and Power Supply

Factors to Consider before buying a Robot Toy

Learn STEM, robotic engineering, and design with Robotic Kits

What to look for in a robotics kit for older kids?

Categories

My Account

Information