“UNO R3 Board Starter Kit 30+ DIY Projects Video tutorials” has been added to your cart. View cart

-14%

Make a Security Lock Panel with 16*2 LCD using Keypad Membrane interfacing with Arduino uno

Name: Make a Security Lock Panel with 16*2 LCD using Keypad Membrane interfacing with Arduino uno
Brand: Robokreeda
SKU: 3640
Price: 1414.82 INR
Availability: InStock
Rating: 5 (1 reviews)

Category: Arduino Compatible Kits Tags: 16*2 LCD, Arduino Uno, Keypad Membrane interfacing, Security Lock Panel

Description
Reviews (0)

The 4×4 Keypad is a general purpose 16 button (4×4) matrix keypad. It comes ready to work, simply peel-off the adhesive backing, stick it to your surface and plug it in.

Maximum Rating: 24 VDC, 30 mA
Interface: 8-pin access to 4×4 matrix
Operating temperature: 32 to 122 °F(0 to 50°C)
Dimensions:Keypad, 2.7 x 3.0 in (6.9 x 7.6 cm),Cable: 0.78 x 3.5 in (2.0 x 8.8 cm)

HARDWARE REQUIRED

SOFTWARE REQUIRED

Arduino IDE ( programmable software for Arduino boards )

You can download the software from this link: https://www.arduino.cc/en/Main/Software

LIBRARY REQUIRED

You need to install these libraries:

Liquid Crystal library
Keypad library

This library is available via the Arduino IDE Library Manager, if you are using a Modern IDE, you can simply use the menu.

Sketch->Include Library->Manage Libraries

Then search for LiquidCrystal and Keypad.

Once found, click on its entry and the install button will appear

IDE (1.6.2 or above), you can simply use the menu: This library is available via the Arduino IDE library manager. If you are using a modern

You can download this library form this link:

LINK: http://goo.gl/PUiBBA (keypad source code and library)or
LINK: http://playground.arduino.cc/Code/Keypad(KEYPAD))

CIRCUIT DESCRIPTION

Keypad Membrane Connection

Using the diagram above as a reference the leftmost pin is pin 8 on the keypad and the rightmost is pin 1.

LCD 16×02 Connection:

The Arduino’s +5V and GND will be connected to the pin of the breadboard

The LCD has 16 pins

The first one from left to right is the Ground (GND) pin
The second pin is the VCC which we connect the +5V pin on the breadboard.
Next is the Vo pin on which we can attach a potentiometer for the contrast of the display
The K (cathode) pin will be connected to the GND pin of the breadboard. The A (anode) pin will be connected to the +5V pin of the breadboard.
The potentiometer’s other pins will be connected to the +5V and GND pin of the breadboard.

Keypad 4×4 and LED Connections:

The keypad has 8 pins, 4 of them are for the rows and other 4 pins for the columns.
The keypad I’m using is 4×4. It has an additional connection input.
The Keypad’s pins will be connected respectively to the Digital 1-2-3-4-5-6-7-8 pin of the Arduino.
The Red and Green LED will be attached on the breadboard
The 220-ohm resistor will be connected to the anode leg of the LED
Both LED’s cathode leg will be connected to the GND of the breadboard.

The Red LED’s Anode with resistor leg will be connected to the Digital 10 and green Led’s Anode with Resistor leg will be connected to digital 11 pins of the Arduino.

Note: You can connect VCC and GND on either first or third terminal of Potentiometer. It is variable resistor which has no polarity. By default, GND Pin has 0Ω Value and VCC Pin has 10KΩ Value.

CODE

CLICK TO DOWNLOAD THE LINK: https://drive.google.com/open?id=0BxpdhMRymue7V21BOHMxeER0LWM

OUTPUT

Output 1:

In the first output, you will see the Welcome text where you can enter the password.

Output 2:

If the password entered is correct then the output will show “Verified”

Output 3:

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

make a digital door lock using 12v Solenoid Door lock interfacing with arduino uno

-16%

-20%

Ultimate Uno R3 Kit compatible with ARDUIN0 IDE

Add to cart

Arduino Compatible Kits

Ultimate Uno R3 Kit compatible with ARDUIN0 IDE

-11%

Blog

{"title":"All","number":"3","post_title":1,"ignore_sticky_posts":true,"meta":{"meta_date":true},"layout":"list","list_layout":"list_1","grid_layout":"grid_1","featured_layout":"featured_1","image_size":"hexwp_thumbnail","ratio":"hw-ratio100","image_width":"27","box_layout":"none","post_type":"post","action":"hexwp_post_list","post_status":"publish"}

Factors to Consider before buying a Robot Toy

September 17, 2024

Learn STEM, robotic engineering, and design with Robotic Kits

September 17, 2024

What to look for in a robotics kit for older kids?

September 17, 2024

You may also like…

make a digital door lock using 12v Solenoid Door lock interfacing with arduino uno

Related products

Scratch Starter Kit,Super Base Kit for Arduino Smd UNO R3 ATmega328P with 15 Lessons Tutorial –

Super Starter Kit for Uno R3 compatible with Arduino IDE

UNO R3 Board Starter Kit 30+ DIY Projects Video tutorials

DIY Ultrasonic Distance Sensor Starter Kit For Compatible with Smd UNO IDE Projects

Crowtail- Deluxe Kit for Arduino V1.0 with Tutorial Compatible with Arduino

Ultimate Uno R3 Kit compatible with ARDUIN0 IDE

Factors to Consider before buying a Robot Toy

Learn STEM, robotic engineering, and design with Robotic Kits

What to look for in a robotics kit for older kids?

Categories

My Account

Information