-25%

Control the Led’s by using specific direction by magic light cup and mercury open optical module using Arduino Uno

Category: Arduino Compatible Kits Tags: Arduino Uno, Control the LEDs, magic light cup, mercury open optical module

Description
Reviews (0)

KIT INCLUDES:

HARDWARE REQUIRED

SOFTWARE REQUIRED

Arduino IDE

You can download it from this link: https://www.arduino.cc/en/Main/Software

PIN DESCRIPTION

MAGIC LIGHT CUP MODULE

Magic Light Cup modules are easy to Interactive Technology Division developed a can and ARDUINO interactive modules, PWM dimming principle is to use the principle of two modules brightness changes. Mercury switches provide a digital signal that triggers the PWM regulator, through the program design, We can see the light like two cups filled with the effect of shuffling back and forth.

– For Arduino DIY project
– Working Voltage: 5V
– Output: Digital output (0/1)
– PWM output
– Material: PCB
– Color: Black
– Dimensions: 0.91 x 0.79 x 0.59 inch / 2.3 x 2.0 x 1.5 cm

MERCURY OPEN OPTICAL TILT SWITCH MODULE

Operating voltage – 5v

Mercury switch module and a digital interface, built-in 13 LED build a simple circuit to produce tilt warning lamp 13 comes with digital interfaces of the LED, the mercury tilt switch sensor interface to access digital 3, when the tilt switch sensor senses a key signal, LED lights, otherwise off.

Arduino GND –> Pin – of module
Arduino 5+ –> Pin middel of module
Arduino 3 –> pin S of module

Tilt case

Non Tilt case

CIRCUIT DESCRIPTION

Connection the PIR Sensor to Arduino

first you connect the all sensors on bread board according to the given diagram and now
provide the all sensors power and gnd take from arduino to breadboard for common connection.
now connect the first module pin no 3&4 to arduino pin no 7 and 6.
now connect the second sensor pin no 3 to arduino uno pin no. 3 and connect the led with this sensor put 1 k resistance on positive point of led ,second point to ground.
now connect the third sensor module to pin no 3and 4 to arduino uno pin no5and 4 here is you connection complete of this circuit

CODE/strong>

CLICK TO SEE THE CODE:

https://docs.google.com/document/d/e/2PACX-1vS5t7eVIk2Igst7SWHvZmBguRv_5IfqG5GFyLy1RNWuZmtce7EGi87RkzAaBsRK-EJlm_YP2DcnLU9g/pub

OUTPUT

This is mercury tilt switch sensor these are the direction sensor uses in planes ,lift, many places.

In this sensor ,mercury in glass tube which provide the signals, it signals as blinking of led, if touch the another end of the sensor point.

This project have three sensor use for three type of working so how is it happen after the all connection we provide the supply to arduino uno now hold the bread board change the direction of the bread board you see the sensors light will change in three direction left,right,up direction use in a plain and then according the direction led’s will stated glowing.

By turning the Breadboard left side , led connected to Magic light cup module will turn on.
By turning the Breadboard right side , led connected to Magic light cup module will turn off.
By turning the Breadboard on up side , led connected to mercury optical tilt switch will turn on.
By turning the Breadboard on down side , led connected to mercury optical tilt switch will turn off.

Reviews

There are no reviews yet.

Be the first to review “Control the Led’s by using specific direction by magic light cup and mercury open optical module using Arduino Uno”

You must be logged in to post a review.

Make a Pattern with 16 Leds using HC595 shift Register interfacing with Arduino Uno

-20%

Turn on and off Led using Tracking Sensor Module

Add to cart

Arduino Compatible Kits

Turn on and off Led using Tracking Sensor Module

-13%

Control a led using infrared sensor and give command by IR Remote interfacing with Arduino Uno

Add to cart

Arduino Compatible Kits

Control a led using infrared sensor and give command by IR Remote interfacing with Arduino Uno

-21%

Make a Dice Game using 16*2 LCD and Tilt switch Module

Add to cart

Arduino Compatible Kits

Make a Dice Game using 16*2 LCD and Tilt switch Module

-6%

-5%

Blog

{"title":"All","number":"3","post_title":1,"ignore_sticky_posts":true,"meta":{"meta_date":true},"layout":"list","list_layout":"list_1","grid_layout":"grid_1","featured_layout":"featured_1","image_size":"hexwp_thumbnail","ratio":"hw-ratio100","image_width":"27","box_layout":"none","post_type":"post","action":"hexwp_post_list","post_status":"publish"}

How to Build a Robot Car at Home (Step-by-Step Guide for Beginners 2026)

April 15, 2026

Top 10 Arduino Projects for Beginners (Step-by-Step Guide 2026)

April 15, 2026

Best Robotics Kits for Beginners in India (2026 Guide)

April 15, 2026

HARDWARE REQUIRED

SOFTWARE REQUIRED

PIN DESCRIPTION

MAGIC LIGHT CUP MODULE

MERCURY OPEN OPTICAL TILT SWITCH MODULE

CIRCUIT DESCRIPTION

Connection the PIR Sensor to Arduino

CODE/strong>

OUTPUT

You may also like…

Make a Pattern with 16 Leds using HC595 shift Register interfacing with Arduino Uno

Turn on and off Led using Tracking Sensor Module

Control a led using infrared sensor and give command by IR Remote interfacing with Arduino Uno

Make a Dice Game using 16*2 LCD and Tilt switch Module

Related products

Scratch Starter Kit,Super Base Sensor Modules Kit Based on Arduino UNO R3 ATmega328P

UNO R3 Board Starter Kit 30+ DIY Projects Video tutorials

2Wd Transparent Smart Motor Robot Car Chassis Kit with Arduino Board

ARDUIN0 Nano V3.0, Nano Starter Kit with Tutorial, SG90, Dupont Wire, Buzzer, DC Motor

ARDUIN0 kit with RFID and bluetooth compatible with Arduino IDE

ARDUIN0 SMD Uno Based Super Starter Kit smd Full Learning Kit

How to Build a Robot Car at Home (Step-by-Step Guide for Beginners 2026)

Top 10 Arduino Projects for Beginners (Step-by-Step Guide 2026)

Best Robotics Kits for Beginners in India (2026 Guide)

Categories

My Account

Information