“UNO Project Super Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE” has been added to your cart. View cart

-10%

Testing TTP224 touch pad module using 16*2 LCD DISPLAY i2c module interfacing with arduino nano

Name: Testing TTP224 touch pad module using 16*2 LCD DISPLAY i2c module interfacing with arduino nano
Brand: Robokreeda
SKU: 3324
Price: 2360 INR
Availability: InStock
Rating: 5 (1 reviews)

Category: Arduino Compatible Kits Tags: 16*2 LCD DISPLAY, arduino nano, TTP224 touch pad

Description
Reviews (0)

KIT INCLUDED:

Arduino Nano with USB Cable – 1
TTP224B 4-channel capacitive module – 1
Power bank-1(not included in kit)
Jumper wire male to female – 40 piece
Jumper wire male to male – 40 piece
Breadboard 840 points – 1
16*2 lcd with i2c module – 1

HARDWARE REQUIRED

Arduino Nano with USB Cable – 1
TTP224B 4-channel capacitive module – 1
Power bank-1(not included in kit)
Jumper wire male to female – 40 piece
Jumper wire male to male – 40 piece
Breadboard 840 points – 1
16*2 lcd with i2c module – 1

SOFTWARE REQUIRED

Arduino IDE 1.8.5 (programmable platform for Arduino)

Click To Download :https://www.arduino.cc/en/Main/Software

SPECIFICATIONS

TTP224B 4-CHANNEL CAPACITIVE TOUCH MODULE

On-board TTP224 capacitive touch 4 key induction IC
On-board 4 road level indicator.
Working voltage: 2 V to 5.5 V DC
Adjustable output mode, key output mode, longest time and fast/low power output
PCB board size: 35(mm) x29 (mm).

ARDUINO NANO

Arduino Pro Mini
Microcontroller	ATmega168
Operating Voltage	3.3V or 5V
Input Voltage	3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
Digital I/O Pins	14 (of which 6 provide PWM output)
Analog Input Pins	8
DC Current per I/O Pin	40 mA
Flash Memory	16 KB (of which 2 KB used by bootloader)
SRAM	1 KB
EEPROM	512 bytes
Clock Speed	8 MHz (3.3V model) or 16 MHz (5V model)

PIN DESCRIPTION

TTP224B 4-CHANNEL CAPACITIVE TOUCH MODULE

VCC: 2V to 5.5V DC

GND: ground

OUT4: high/low output

OUT3: high/low output

OUT2: high/low output

OUT1: high/low output

ARDUINO NANO

RAW	For supplying a raw (regulated) voltage to the board
VCC	The regulated 3.3 or 5 volt supply
GND	Ground pins
RX	Used to receive TTL serial data
TX	Used to transmit TTL serial data
2 and 3	Digital I/O pins. These pins can also be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value
3, 5, 6, 9, 10, and 11	Digital I/O pins. They can also be configured to provide 8-bit PWM output
10, 11, 12 and 13	Digital I/O pins. They can also be configured as SPI pins; 10 – (SS), 11 – (MOSI), 12 – (MISO) and 13 – (SCK)
A0 to A3	Analog input pins
A4 and A5.	Analog input pins. They can also be used as IIC pins; A4 – (SDA) and A5 – (SCL).
A6 and A7	Analog input pins
Reset	The microcontroller can be reset by bringing this pin low

CIRCUIT CONNECTION

Out1 of TTP224 to the Nano D11
Out2 of TTP224 to the Nano D10
Out3 of TTP224 to the Nano D9
Out4 of TTP224 to the Nano D8
Ground to the negative rail and Vcc to the positive rail
I2C module Vcc to positive rail and ground to negative rail
I2C module sda pin to Nano A4 and scl to A5

CODE

Click to see the code or copy the link:

https://docs.google.com/document/d/e/2PACX-1vT7XfN3XPQkFHLgTqkjECB62lWK4TsB1RyxRtlPCCGaFYCPsjmTjW7ApuxuG24Tr3kfiMX6wmrd56dE/pub

WORKING

Upload the code and see the output.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

-12%

Blog

{"title":"All","number":"3","post_title":1,"ignore_sticky_posts":true,"meta":{"meta_date":true},"layout":"list","list_layout":"list_1","grid_layout":"grid_1","featured_layout":"featured_1","image_size":"hexwp_thumbnail","ratio":"hw-ratio100","image_width":"27","box_layout":"none","post_type":"post","action":"hexwp_post_list","post_status":"publish"}