KIT INCLUDES:
HARDWARE REQUIRED
SOFTWARE REQUIERD
Arduino IDE 1.8.5 (programmable platform for Arduino)
Click To Download :https://www.arduino.cc/en/Main/Software
SPECIFICATIONS
TTP223B CAPACITIVE TOUCH SENSOR
The TTP223 is a touch pad detector IC which offers 1 touch key. The touching detection IC is designed for replacing traditional direct button key with diverse pad size. Low power consumption and wide operating voltage are the contact key features for DC or AC application.
- Operating voltage 2.0V~5.5V
- Operating current @VDD=3V, no load, SLRFTB=1, At low power mode typical 1.5uA, maximum 3.0uA and at fast mode typical 3.5uA, maximum 7.0uA
- Operating current @VDD=3V, no load, SLRFTB=0, At low power mode typical 2.0uA, maximum 4.0uA and at fast mode typical 6.5uA, maximum 13.0uA
- The response time max about 60mS at fast mode, 220mS at low power mode @VDD=3V
- Provides Fast mode and Low Power mode selection by pad option (LPMB pin)Operating Temperature:-20 ~ +70 ℃
5V 1 CHANNEL RELAY MODULE
The module is uses SRD relay module to control high-voltage electrical devices. (maximum 250V).It can be used in interactive projects and can also be used to control the lighting, electrical and other equipment can be controlled directly by a wide range of microcontrollers and can be controlled through the digital IO port, such as solenoid valves, lamps, motors and other high current or high voltage devices.
- Number of I/O Channels: 1
- Type: Digital
- Switching capacity available by 10A in spite of small size design for high-density P.C. board mounting technique.
- Control signal: TTL level
- Max. Allowable Voltage: 250VAC/110VDC
- Max. Allowable Power Force: From C(800VAC/240W), From A(1200VA/300W)
- UL, CUL,TUV recognized.
- Indication LED for Relay’s Status
SPECIFICATIONS
TTP223B CAPACITIVE TOUCH SENSOR
CIRCUIT DESCRIPTION
- SIG Pin of TTP223B connects to Arduino’s Digital Pin no. 9
- VCC Pin of TTP223B connects to Arduino’s 5v pin
- GND Pin of TTP223B connects to Arduino’s GND pin
- 5v relay module’s pin S to Arduino’s Digital Pin 2
- VCC Pin of 5v Relay Module connects to Arduino’s 5v pin
- GND Pin of 5v Relay Module connects to Arduino’s GND pin
CODE
WORKING
Touch the TTP223B WITH finger then Relay Module’s Green Light Will Turn On and Bulb too.
Then touch the sensor and Bulb will turn off.
Super Starter Kit for Uno R3 compatible with Arduino IDE1 ×₹2,594.82
