“2Wd Transparent Smart Motor Robot Car Chassis Kit with Arduino Board” has been added to your cart. View cart

-25%

Interfacing Tilt sensor with Arduino Uno showing output on led

Name: Interfacing Tilt sensor with Arduino Uno showing output on led
Brand: Robokreeda
SKU: 3048
Price: 885 INR
Availability: InStock
Rating: 5 (1 reviews)

Category: Arduino Compatible Kits Tags: Arduino Uno, Interfacing Tilt sensor

KIT INCLUDED:

9v Battery with DC jack – 1
Arduino uno with USB Cable -1
Led – 2
Tilt Sensor Module – 1
Jumper wire (Male to female) – 40 pieces

HARDWARE REQUIRED

9v Battery with DC jack – 1
Arduino uno with USB Cable -1
Led – 2
Tilt Sensor Module – 1
Jumper wire (Male to female) – 40 pieces

SOFTWARE REQUIRED

Arduino IDE 1.8.5 (programmable platform for Arduino)

Click To Download :https://www.arduino.cc/en/Main/Software

PIN DESCRIPTION

TILT SENSOR

LED

CIRCUIT CONNECTION

The tilt sensor module can be connected to Arduino using suitable jumper wires. First of all connect the power supply lines; VCC and GND of the module to 5V and GND of the Arduino respectively. Next link the digital output (DO) of the module to digital pin 2 (D2) and analog output (AO) to analog input 0 (A0) of the Arduino. The whole hardware should be powered by a 9V DC / USB source through the DC IN /USB socket of the Arduino board. Keep the tilt switch position in an upright position as indicated in the figure shown below.

CODE

This example code wakes the onboard indicator (LED at D13) of the Arduino when a tilt is inputted by the tilt sensor module through the occupied digital input (D2). Just copy-paste this code into your Arduino IDE, compile, and upload it to your Arduino as usual.

const int statusLED = 13;

const int switchTilt = 2;

int val = 0;

void setup(){

pinMode (statusLED,OUTPUT);

pinMode (switchTilt,INPUT);

}

void loop(){

val = digitalRead(switchTilt);

if (val == HIGH){

digitalWrite(statusLED,HIGH);

}

else {

digitalWrite(statusLED,LOW);

}

Note that this code does not include a “software-debounce” feature commonly used with button/switch inputs. This is not necessary here because the tilt sensor module have a built-in (1ms) “hardware debounce” arrangement using a simple RC network (R-10K & C-100n).

Battery operated	Yes,1 nos 9V battery included

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Make a Dice Game using 16*2 LCD and Tilt switch Module

-6%

Related products

ARDUIN0 kit with RFID and bluetooth compatible with Arduino IDE

Add to cart

Arduino Compatible Kits

ARDUIN0 kit with RFID and bluetooth compatible with Arduino IDE

-32%

Ultimate Uno R3 Kit compatible with ARDUIN0 IDE

Add to cart

Arduino Compatible Kits

Ultimate Uno R3 Kit compatible with ARDUIN0 IDE

-11%

Crowtail Advanced Kit for Arduino V2.0 Programming Leaning Kit with 22 Modules for Building Projects

Out of Stock

Arduino Compatible Kits

Crowtail Advanced Kit for Arduino V2.0 Programming Leaning Kit with 22 Modules for Building Projects

-20%

ARDUIN0 SMD Uno Based Super Starter Kit smd Full Learning Kit

Add to cart

Arduino Compatible Kits

ARDUIN0 SMD Uno Based Super Starter Kit smd Full Learning Kit

-5%

Basic Starter Kit for Compatible with Arduino SMD UNO, Breadboard, LED, Resistor,Jumper Wires and Power Supply

Add to cart

Arduino Compatible Kits

Basic Starter Kit for Compatible with Arduino SMD UNO, Breadboard, LED, Resistor,Jumper Wires and Power Supply

-12%

Scratch Starter Kit,Super Base Sensor Modules Kit Based on Arduino UNO R3 ATmega328P

Add to cart

Arduino Compatible Kits

Scratch Starter Kit,Super Base Sensor Modules Kit Based on Arduino UNO R3 ATmega328P

-10%

Blog

{"title":"All","number":"3","post_title":1,"ignore_sticky_posts":true,"meta":{"meta_date":true},"layout":"list","list_layout":"list_1","grid_layout":"grid_1","featured_layout":"featured_1","image_size":"hexwp_thumbnail","ratio":"hw-ratio100","image_width":"27","box_layout":"none","post_type":"post","action":"hexwp_post_list","post_status":"publish"}