-14%

How to Check the Micro Controller of 2.4” TFT Touch Display using Arduino Mega

Category: Arduino Compatible Kits

HARDWARE REQUIRED

LIBRARY REQUIRED

SWIFT Library by smoke and wires:
https://github.com/Smoke-And-Wires/TFT-Shield-Example-Code

AdaFruit GFX Library
https://github.com/adafruit/Adafruit-GFX-Library

SOFTWARE REQUIRED

Arduino IDE 1.8.5 (programmable platform for Arduino)

Click To Download :https://www.arduino.cc/en/Main/Software

SPECIFICATIONS

2.4″ LCD Touch Display

2.4″ Touch LCD TFT display
SPFD5408 controller with built in the video RAM buffer
240×320 resolution, 18-bit (262,000) color
8 bit digital interface, plus 4 control lines
Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the microSD
Works with any library available.
5V compatible! Use with 3.3V or 5V logic
Onboard 3.3V 300mA LDO regulator
4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control
On-board Micro-SD card electric circuit

Arduino Mega

The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and a larger space for your sketch it is the recommended board for 3D printers and robotics projects. This gives your projects plenty of room and opportunities.

PIN DESCRIPTION

Arduino Mega 2560

CIRCUIT CONNECTION

To make the circuit you need to attach 2.4” TFT screen on above the Arduino Mega 2560 as given in the instruction below:

2.4” TFT SCREEN	ARDUINO MEGA 2560
J3
LCD_RD	A0
LCD_WR	A1
LCD_RS	A2
LCD_CS	A3
LCD_RST	A4
	A5
J4
	VIN
GND	GND
	GND
5V	5V
3V3	3.3V
	RESET

J2
	RX0
	TX0
LCD_D2	2
LCD_D3	3
LCD_D4	4
LCD_D5	5
LCD_D6	6
LCD_D7	7
J1
LCD_D0	8
LCD_D1	9
SD_SS	10
SD_D1	11
SD_D0	12
SD_SCK	13

CODE

CLICK TO DOWNLOAD THIS :

https://drive.google.com/open?id=1rPgmvTtLR-EBiaziJpt819L2cJT4H7XH

WORKING

Here we connect the Arduino mega and putt TFT on it and upload the code it will show display that which microcontroller based TFT result shown on the serial monitor.

Battery operated	Yes , 1 nos 9V battery included

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products

Make A Line Follower Robot Using L293D Motor Driver Module Interfacing With Arduino Uno-

Add to cart

Arduino Compatible Kits

Make A Line Follower Robot Using L293D Motor Driver Module Interfacing With Arduino Uno-

-9%

Basic Starter Kit For Compatible With Arduino SMD UN

Add to cart

Arduino Compatible Kits

Basic Starter Kit For Compatible With Arduino SMD UN

-10%

Scratch Starter Kit,Super Base Kit for Arduino Smd UNO R3 ATmega328P with 15 Lessons Tutorial –

Add to cart

Arduino Compatible Kits

Scratch Starter Kit,Super Base Kit for Arduino Smd UNO R3 ATmega328P with 15 Lessons Tutorial –

-2%

Scratch Starter Kit,Super Base Sensor Modules Kit Based on Arduino UNO R3 ATmega328P

Add to cart

Arduino Compatible Kits

Scratch Starter Kit,Super Base Sensor Modules Kit Based on Arduino UNO R3 ATmega328P

-10%

ARDUIN0 SMD Uno Based Super Starter Kit smd Full Learning Kit

Add to cart

Arduino Compatible Kits

ARDUIN0 SMD Uno Based Super Starter Kit smd Full Learning Kit

-5%

DIY Ultrasonic Distance Sensor Starter Kit For Compatible with Smd UNO IDE Projects

Add to cart

Arduino Compatible Kits

DIY Ultrasonic Distance Sensor Starter Kit For Compatible with Smd UNO IDE Projects

-4%

Blog

{"title":"All","number":"3","post_title":1,"ignore_sticky_posts":true,"meta":{"meta_date":true},"layout":"list","list_layout":"list_1","grid_layout":"grid_1","featured_layout":"featured_1","image_size":"hexwp_thumbnail","ratio":"hw-ratio100","image_width":"27","box_layout":"none","post_type":"post","action":"hexwp_post_list","post_status":"publish"}