-10%

Test a 16*2 LCD display with I2C module interfacing with arduino uno

Category: Arduino Compatible Kits Tags: 16*2 LCD DISPLAY, Arduino Uno, I2C module

KIT INCLUDES:

In this project you will see how to connect i2c LCD display to arduino and how to print on LCD display.

Each I2C bus consists of two signals: SCL and SDA. SCL is the clock signal, and SDA is the data signal. The clock signal is always generated by the current bus master; some slave devices may force the clock low at times to delay the master sending more data (or to require more time to prepare data before the master attempts to clock it out). This is called “clock stretching”

HARDWARE REQUIRED

SOFTWARE REQUIRED

Arduino IDE 1.8.5 (programmable platform for Arduino)

Click To Download :https://www.arduino.cc/en/Main/Software

SPECIFICATIONS

I2C LCD Serial Module

IC/I2C Interface Adapter Module is used for 16×2 LCD Display. It uses the PCF8574T IC chip which converts I2C serial data to parallel data for the LCD display. Also this interface module simplifies connecting an Arduino to a 16×2 Liquid Crystal display using only 4 wires.

Supply Voltage: 5V
Interface: I2C
Compatible for 16×2 LCD
Brightness and Contrast can be adjusted by the Potentiometer

**16*2 LCD**

LCD Display Mode: STN, Positive, Transflective
Display Color: Deep Blue/ Yellow Green
Viewing Angle: 6H
Driving Method : 1/16 duty, 1/5 bias
Back Light : Yellow-Green LED backlight
Outline Dimension: 803615.8 MAX

PIN DESCRIPTION

I2C LCD Serial Monitor

16*2 LCD

Symbol	External Connection	Function
VSS	Power Supply	Signal GROUND for lcm
VDD		POWER SUPPLY for logic lcm
V0		Contrast Adjust
RS	MPU	Register Select Signal
RW	MPU	Read/Write Select Signal
E	MPU	Operation Enable Signal
DB0~DB3	MPU	Four Low order bidirectional three state bus lines. Used for data transfer between the MPU and LCM. These four are not used between 4 Bit operations.
DB4~DB7	MPU	Four high order bidirectional Three state bus lines used for data transfer between the MPU
A	LED BKL power Supply	Power Supply for BKL
K	LED BKL power Supply	Power Supply for BKL

CIRCUIT CONNECTION

Attach the LCD display with I@C as given in diagram below:

I2C SHIELD	Arduino uno
Gnd	Gnd
Vcc	5v
SDA	A4
SCL	A5

CODE

Click to see the code or copy the link:

https://docs.google.com/document/d/e/2PACX-1vQy2uxOkll2BakGIkd1q8KoxZ9ikmYRmuTMAK4c_5qAe2_9mLWIHsMkybG7OMVi-mJ6mrmxSRZ-V3mr/pub

WORKING

Upload the code and must check your connection before uploading the code

Battery operated	Yes , 1 nos 9V battery included

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Testing TTP224 touch pad module using 16*2 LCD DISPLAY i2c module interfacing with arduino nano

-10%

Related products

Ultrasonic Distance Sensor Starter Kit Compatible with Arduino IDE

Add to cart

Arduino Compatible Kits

Ultrasonic Distance Sensor Starter Kit Compatible with Arduino IDE

-19%

Super Starter Kit for Uno R3 compatible with Arduino IDE

Add to cart

Arduino Compatible Kits

Super Starter Kit for Uno R3 compatible with Arduino IDE

-35%

ARDUIN0 SMD Uno Based Super Starter Kit smd Full Learning Kit

Add to cart

Arduino Compatible Kits

ARDUIN0 SMD Uno Based Super Starter Kit smd Full Learning Kit

-5%

Basic Starter Kit For Compatible With Arduino SMD UN

Add to cart

Arduino Compatible Kits

Basic Starter Kit For Compatible With Arduino SMD UN

-10%

IDUINO RC522 RFID Starter Kit Compatible with Arduino UNO, Mega2560, Nano with ADXL345

Add to cart

Arduino Compatible Kits

IDUINO RC522 RFID Starter Kit Compatible with Arduino UNO, Mega2560, Nano with ADXL345

-31%

Electronics Project LCD1602 Beginners Starter Kit for Compatible with Arduino Smd UNO R3, Mega2560, Nano

Add to cart

Arduino Compatible Kits

Electronics Project LCD1602 Beginners Starter Kit for Compatible with Arduino Smd UNO R3, Mega2560, Nano

-23%

Blog

{"title":"All","number":"3","post_title":1,"ignore_sticky_posts":true,"meta":{"meta_date":true},"layout":"list","list_layout":"list_1","grid_layout":"grid_1","featured_layout":"featured_1","image_size":"hexwp_thumbnail","ratio":"hw-ratio100","image_width":"27","box_layout":"none","post_type":"post","action":"hexwp_post_list","post_status":"publish"}

Factors to Consider before buying a Robot Toy

September 17, 2024

Learn STEM, robotic engineering, and design with Robotic Kits

September 17, 2024

What to look for in a robotics kit for older kids?

September 17, 2024

HARDWARE REQUIRED

SOFTWARE REQUIRED

SPECIFICATIONS

I2C LCD Serial Module

**16*2 LCD**

PIN DESCRIPTION

I2C LCD Serial Monitor

16*2 LCD

CIRCUIT CONNECTION

CODE

WORKING

You may also like…

Testing TTP224 touch pad module using 16*2 LCD DISPLAY i2c module interfacing with arduino nano

Related products

Ultrasonic Distance Sensor Starter Kit Compatible with Arduino IDE

Super Starter Kit for Uno R3 compatible with Arduino IDE

ARDUIN0 SMD Uno Based Super Starter Kit smd Full Learning Kit

Basic Starter Kit For Compatible With Arduino SMD UN

IDUINO RC522 RFID Starter Kit Compatible with Arduino UNO, Mega2560, Nano with ADXL345

Electronics Project LCD1602 Beginners Starter Kit for Compatible with Arduino Smd UNO R3, Mega2560, Nano

Factors to Consider before buying a Robot Toy

Learn STEM, robotic engineering, and design with Robotic Kits

What to look for in a robotics kit for older kids?

Categories

My Account

Information